Announcements

Job offersmore »

Tweeting Growers

Last commentsmore »

Top 5 - yesterday

Top 5 - last week

Top 5 - last month

Exchange ratesmore »




Malaysian nursery reaps benefits from upgrade to smart sensing tech

Wengfong Nurseries, growers of Chrysanthemum cuttings based in the Cameron Highlands district of Malaysia and the biggest propagator in the country, upgraded from inaccurate handheld sensors and data-loggers (read: time wasted with manually taking measurements) to monitoring EC, VWC, temperature/humidity, and PAR (sunlight strength) remotely with 30MHz wireless sensing technology.

The results? More accurate data on crops and their environment, better use of employee time, increased crop quality, and 3,000 liters of fertilizers saved.
Wengfong has been using 30MHz technology since March, 2018 and is saving approximately $7.50 USD per day in fertilizer cost. In a year, Wengfong is expected to save approximately $2,780.95 USD on fertilizer-- more than the nursery spent on smart sensing tech ($2,500 USD, including yearly software fee).

“I can trust the information from anywhere in the world on my iPhone. Sometimes I cannot sleep and I will check my phone to make sure that my plants are doing okay. I feel more confident in my decisions and I am already saving money everyday through the usage of the 30MHz solution”, says E.K. Tan, Director of Wengfong Nurseries.

How does EC monitoring lower fertilizer costs?
Simply put, EC determines the salt concentration of a solution which in turn allows growers to understand nutrient conditions. If the EC value is deemed high in the substrate, then there is no need to further fertilize. Accurately knowing the EC measurements allows you to better control how fertilizer is dispensed.

Here's the calculation, in USD:


*Improved EC measurements are derived from just one sensor covering approximately 1,000 square meters of the entire 4 hectare farm (or approximately 2.5%). There is substantial room for additional savings in other areas of the farm as more sensors are deployed.

Improved yield quality with smart sensing?
Wengfong Nurseries Director E.K. Tan is convinced that with a fully deployed sensor solution (i.e. covering the entire 4 hectare farm), he’ll be able to improve the quality, and by extension, profitability of his yield.

Wengfong’s cuttings are classified as Type A, Type B and Type C quality outputs. The price differential between the various types on the open market is significant. A Type A output will sell for roughly $2.70 per bundle (10 stems) whereas a Type B output will sell for only $1.25 per bundle. Based on conversations with E.K., historically 80% of Wengfong’s output is considered Type A, 10% Type B, and 10% Type C. E.K believes that deploying smart sensing throughout the farm will lead to a 10% increase in Type A flowers.

A 10% increase in type A flowers will result in additional annual revenue of approximately $53,000 USD (10% * 364,000 * ($2.70-$1.25)). This results in a year 1 ROI of approximately 128% ((53,000-23,200)/23,200). We note that this ROI is on the conservative side as numerous other savings were not accounted for (for example, manual labor hours saved, savings in fertilizer cost etc.).

Here's how we calculate it:
 




 
What's the product?
Wengfong works with 30MHz tech (a choice of sensors, a scalable mesh network with impeccable uptime, and an analytics platform) to monitor crops remotely in real-time and receive alerts based on custom settings whenever conditions change.

30MHz sources the best sensors out there, and makes sure they're rugged, wireless, and sending accurate data you can see exactly how you need in easy-to-use dashboards accessible on any device.
 

The substrate moisture sensor, monitoring VWC, EC and temperature
 

Customizable, interactive charts make it easy to spot trends and changes in your crops' performance
 
For more information:
30MHz
Moezelhavenweg 9
1043AM Amsterdam
Netherlands

Publication date: 6/12/2018

 


 

Other news in this sector:

8/20/2018 Passively cooled LED offers bright, uniform light for all crops
8/15/2018 Listen to your roots
8/15/2018 UK: Cambridge scientist photographs tiny plants
8/14/2018 Wagagai in Uganda chooses Service Engine
8/10/2018 NL: New test facility for NovaCropControl
8/8/2018 How the cut flower industry could use AI to grow
7/20/2018 Programmable light spectra without loss of power
7/20/2018 "We’re capturing data we previously couldn’t"
7/20/2018 "It is a misunderstanding to think LED lights do not get dirty"
7/19/2018 Controlling greenhouse humidity during summer’s hottest months
7/19/2018 How MOT-proof is your grow lighting installation?
7/17/2018 Russian LED maker prescribes light recipes
7/13/2018 Hort Americas first North American distributor for 30MHz
7/12/2018 The quest for knowledge in indoor farming and new crops
7/12/2018 "Water by weight for superior hanging baskets"
7/11/2018 LED lighting: where are we now?
7/10/2018 Bloemencorso using modern tech for safety and traffic management
7/6/2018 "Add durability to your favorite watering tool"
7/5/2018 Australia: New heights for horticulturalists
7/4/2018 Cultivation floor and irrigation seamlessly integrated

 

Leave a comment: (max. 500 characters)

  1. All comments which are not related to the article contents will be removed.
  2. All comments with non-related commercial content, will be removed.
  3. All comments with offensive language, will be removed.




  Display email address

  new code