Job offersmore »
- Assistant Grower - Canada
- Experienced International Buyer/Seller Germany
- Project and Sales Manager - Russia/Caucasian Region
- Quality Coordinator EU in Supply Chain Management Dep.
- Regional Sales Director - United States
- Territory Sales Position - US
- International Tomato Grower - Worldwide
- Grower Manager - US
- Application Scientist Salesperson - US
- Technical & Operations Manager - Australia
Last commentsmore »
- India: Government gives 50% subsidy on a poly house (727)
- Development of the export oriented cut flower rose industry in Africa (4)
- Photoreport: Horticontact (4)
- "Horticulture in Iran can be an alternative to petroleum" (2)
- NL: Vreugdenhil Young Plants launches new concept Pick & Joy (1)
- Will sea freight be an alternative to Latin American air freight? (1)
- Take a look inside the greenhouse of a Dutch succulent grower (3)
- Meet Greenlife in the Netherlands (1)
- In search of a transportation proof Poinsettia (1)
Top 5 - yesterday
- Expo Agroalimentaria receives more interest from ornamental industry
- Danziger intrigues visitors at the FloraHolland Trade Fair
- "Limonica highly effective against thrips and whitefly"
- Europe and China sign cooperation agreement on plant variety rights
- US (MI): Walters Gardens nears completion of Acclimation Range
Top 5 - last week
Top 5 - last month
Exchange ratesmore »
New state-of-the-art operational site for Ball AustraliaPowerplants recently completed the construction of a brand new operational site for seedling producers, Ball Australia.
The new state of the art 1.5 hectare site was delivered as a turnkey project by Powerplants to enable Ball to increase their operational capacity.
Ball Australia – under construction
Ball had a need to relocate from their original Keysborough site for a number of reasons. The Perry Road site was based on rented land, and was also in close proximity to the ever increasing urban fringe. Ball also had an identified need to expand, but were reluctant to invest in the rented site, so the decision was made to purchase land in Skye.
Part of the decision to choose a green filed site was also based on the fact that Ball had a well-established staff base, and the management were keen to retain the existing workforce. The new site also allowed for a ‘clean sheet’ approach to planning with no restrictions to existing infrastructure, as well as good access to a major road networks with direct routes to Melbourne and interstate routes.
The initial design for the new site was achieved via a consultative process with Powerplants Directors, Carl van Loon and Simon Gomme, and the Managing Director, the Head grower and the Head of Operations from Ball. The goal of the design team was to develop a design plan that met the existing needs of Ball, and also had the capacity to incorporate expansion opportunities at a later date. Key to this vision was the ability to look to the future for expansion of the facility but also keeping the ratio of the different growing zones in sync.
The structure itself was based on a traditional greenhouse design but with the inclusion of a double skin polythene cladding. This covering was chosen for it’s for thermal properties and a comprehensive cost benefit analysis study revealed that this was more cost effective cladding material over a 20 year period.
The new facility takes shape
Being a brand new site, the opportunity was also present for the inclusion of a number of new innovations, the inclusion of which has left the structure positively bristling with new technologies.
The old climate control system at the Perry Road site was traded in against a brand new Priva Connext climate control computer that has been installed at the Skye site. The upgraded control system was chosen to give accurate climate management that also included a predictive capability to ensure accurate and timely operation of both the heating and ventilation systems.
New Boiler and CO2 extraction system
The boiler also has a CO2 extraction system that now allows for supplementing CO2 levels within the mother stock area, thus giving enhanced growth rates.
Mother stock house with CO2 enrichment
One of the unique features of the structure is the inclusion of a Cabrio style roof house, where the whole roof surface opens as opposed to individual vents.
Cabrio Roof in operation
This instant exposure to external conditions now allows the growers at Ball to subject plants to the perfect conditions for hardening off before dispatch.
For the protection of plants to the harsh Australian sun, automated shade screens have also been installed.
Shade screen protection for plants
Energy saving screens and blackout curtains complete the picture, allowing for a well-managed climate and day length control in specific crop growing areas.
A centralised irrigation room has been constructed to service the needs of the facility, and all water is sterilised via an Ultra Violet treatment process, thus reducing the risk of water borne pathogens. The irrigation system has a number of fertilizer dosing units that operate independently, and this gives the growers the flexibility to have up to four separate fertiliser recipes on demand, plus fresh water at anywhere across the facility.
The new facility has also seen the installation of a number of irrigation booms that gives precise irrigation to plants. The booms are computer controlled and can be programmed to irrigate specific areas within the greenhouse. The trigger for irrigation control can also be derived from monitoring Vapour Pressure Deficit (VPD). This now means that the irrigation systems are responding to precise climatic requirements, and ultimately giving Ball better growth and response from their plants via this form of precision irrigation.
On top of the traditional growing areas, the design has also included the construction of climate managed germination chambers to promote more uniform germination of seedlings, and also a plant quarantine and seed quarantine facility.
Although the project involved the construction of a brand new facility, some infrastructure from the old site was transferred to the new site. Rolling benches and transplanters were identified as being transferrable from the old to the new site, and the transition of this equipment and continued production was key to the management of the project.
Powerplants Director, Simon Gomme, oversaw the construction as the project manager. Within this role, Simon effectively managed all aspects of the build including obtaining various permits, dealing with state and local government bodies such as Vic Roads, Energy Australia, Melbourne Water and Country Fire Authority to name but a few. Dealing with service providers is a complex business as their ability to react in a timely manner dictates timelines and also put pressure on the project. Customers often under estimate the time and cost for services to be installed, and this was an area that Simon spent a considerable time managing to ensure the project remained on track.
Simon was also responsible for overseeing all procurement for the site, as well as coordinating all third part contractors.
It is safe to say that the final installed solution has fully addressed the challenges Ball were facing. The new facility has presented Ball with a number of benefits to their business since installation. This has seen an increased capacity in greenlife material, and also a much finer level of climate control of environment than before. The site now has 12 differing growing zones – far more than on the old site.
One of the key factors in the whole project was to ensure that there was no break in production for Ball themselves. This was achieved via a well planned and executed transition process, overseen by Simon Gomme.
Ball has received excellent ongoing support on all equipment that Powerplants installed. Powerplants have been committed to all stages of the project to ironing out any teething troubles and ensuring the accurate and reliable operation of installed equipment. Technical staff have been on call 24/7 to respond to any issues.
Staff training in the use of the main greenhouse and the various equipment within the structure has been carried out on an ongoing basis. Powerplants staff have provided the training along with the assistance of international experts that were flown in to Australia to complement the expertise of the Powerplants staff.
“Moving a working production facility from an existing site, to a brand new facility is a vastly complex and challenging project. The process was enhanced by the expertise and advice of the Powerplants team, who were 100% committed to ensuring the project was a success. We now have a world class facility that we can use as a base for taking our business to the next level”, said Paul Boland, Ball Australia's managing Director.
For more information:
+61 3 8795 7750
Publication date: 9/13/2017
Other news in this sector:
Leave a comment: (max. 500 characters)
- All comments which are not related to the article contents will be removed.
- All comments with non-related commercial content, will be removed.
- All comments with offensive language, will be removed.